Drawings
Drawings done to try and reconcile all of our comments from the forum ...
- Current Piece Layouts - Version 1.5 Added 5/5/2008
- A/C Vent & Ceiling Console Pieces - 2 page Acrobat file
- Interior Pieces - 4 page Acrobat file
- Piece Layout - Acrobat file
- NOTES:
- This consolidates the last 2 updates.
- Turn off "automatic resize" or whatever your particular version of Acrobat might say. The outline around the A/C Vent and Interior Pieces pages is exactly 6 by 9 inches when printed at 1:1 scale.
- The Piece Layout image (kindly tracked down by Mario Perdue) show the basic assembly for the interior. This is an updated version of the old image that now includes arrows showing which edges are attached to which other edges. It's supposed to make it less complicate ...
- Piece Layouts - Version 1.5
- A/C Vent & Ceiling Console Pieces - Acrobat
- Piece Layouts - Version 1.4
- Piece Layouts - Version 1.3
- Interior Pieces - Acrobat (removed - no longer
accurate)
- Console Transparency Layout - JPG
- Piece Layouts - Version 1.1
- Interior Pieces - Acrobat (removed - no longer
accurate)
- Piece Layouts - Version 1.0
- Interior Pieces - Acrobat (removed - no longer
accurate)
- Blueprints - Version 1.2.2
Finally, after 2-1/2 months I'm finally posting an
update!
- Profile
- Acrobat
- Top
View
- Acrobat
- Toward
Front
- Acrobat
- Toward Rear - Acrobat
- Piece Layouts - Acrobat (removed - no longer accurate)
- NOTES:
- Includes the newly discovered armrest and accurized
equipment locker.
- The equipment and armrest are designed as one piece
- it's quite likely that there are two separate pieces making up
these items, but with a dark interior and sufficiently dark light
this difference will not be noticeable.
- Starboard-side wall and floor of antechamber not
yet updated - still need to be relieved to allow door to open
properly.
- I heartily suggest you test this layout with cardboard
before going to plastic - 1) you'll get a better feel for how the
pieces fit, 2) you'll be able to spot any mistakes I've made.
- These are not yet annotated, so all of the dashed
lines might be a bit confusing.
- The piece layouts are 1:2 scale (so they fit on 8.5x11
paper). Full scale, printable versions coming soon.
- I haven't included the well in the central console
(it'd be a major pain to create the overlays so that this part looks
1/2 way decent).
- The central display area STILL does not have the curve
cut out for the window. (You'll want to base this shape on your
actual front wall.)
- The ceiling (and A/C vent) has been removed from
the drawings as this needs tons of work to make it useful. Am trying
to work out an arrangement with a couple of spherical sectors that
will closely simulate the actual ceiling.
- Randy Stuart's Drawings
Thanks to Randy (HAL9000) for putting together
these plans. They're a great starting point for discussion.